Scotch-Brite Clean and Strip XT Pro Extra Cut Disc features aluminium oxide abrasive mineral incorporated into an open nylon web. It is designed to remove heavy rust, thick paint and corrosion while also scratching the base material underneath, which can save you time. The highly conformable, high-strength fibres resist chunking and loading, and they perform well on edges.
Take Advantage of High Conformability
With its reengineered fibre web, the Scotch-Brite Clean and Strip XT Pro Extra Cut Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.
In addition to its high conformability, the Scotch-Brite Clean and Strip XT Pro Extra Cut Disc offers low vibration, decreased chunking, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.
Save Time with Aluminium Oxide
We designed our Scotch-Brite Clean and Strip XT Pro Extra Cut Disc with aluminium oxide abrasive mineral because of its ability to remove heavy coatings and simultaneously scratch and clean to the bare metal underneath without leaving divots. This means that operators can remove a coating from a workpiece and get it ready for welding or adhesive application with the same disc – saving the time of switching abrasives.
Spongy Web, Sharp Mineral
To engineer our Scotch-Brite Clean and Strip XT Pro Extra Cut Disc, aluminium oxide mineral is combined with non-woven nylon fibres using resin. Aluminium oxide is a very hard mineral that delivers a high cut rate, commonly used in high-pressure applications like cutting and weld removal. The resin bond strengthens the fiber web and allows it to gradually break down to reveal new fibres and sharp mineral – delivering a consistent cut over the life of the abrasive. The combination of fibre strands, resin and abrasive mineral forms a thick, open web. Gaps in the web allow swarf to escape, minimising loading of the abrasive.
- Quickly removes heavy rust, thick paint, corrosion and cleans welds
- Aluminium oxide mineral aggressively removes top layer and cleans to the bare metal underneath
- High conformability provides a larger contact patch for faster removal rates
- High-strength fibre resists chunking and performs well on edges
- Resists loading for consistent cutting action
- High speed rating and low vibration
| Applications: | - Removing heavy rust
- Removing rust pits
- Removing thick paint
- Removing corrosion
- Removing weld discolouration
- Weld cleanup
|
| Pack Size: | Pack of 5 |
Please note that the best effort has been made to keep the stock levels accurate. If the stock level is quite low for this product, we recommend calling us on 1300 BC COAT (222 628) to confirm if this item is in stock before purchasing. Please note that if the item is on special or is a Mirka product, the stock levels are checked frequently.
Delivery to Sydney metro areas are very frequent and are usually delivered within 2 days. If you are located anywhere else in Australia, it may take between 2-8 days providing the item is in stock.
If 'Preorder' is showing, this means that this product is ordered in as your order is placed, or we have run out of stock and will order the product in for you. Call us on 1300 BC COAT (222 628) to check.
Trizact Hookit Abrasive Dis...