GSA Ezi Filler - Automotive Body Filler is a multipurpose, high performance, premium lightweight body filler. The technically advanced, unique formula is easy spreading, reducing sanding time to remove heavy texture.
It is a High Performance Premium Lightweight Body Filler designed for professional use to repair damaged body panels (cars, large vehicles, etc.) where increased productivity, decreased material costs and premium results are desired.
- Easy to mix & apply
- Sets fast, 15 -30 minutes depending on temperature & conditions
- Will not slump
- Light weight
- Combines good filling, smooth spreading properties and self- leveling formula provides a free surface free of voids, making the filler easy to shape and work
- Incorporates advanced air release agents that allow entrapped air to migrate to the surface and release after spreading
- The technology combined with the vacuum processing insures a pinhole and void free surface when mixed and applied properly
- Shows the easiest sanding property and will not clog sanding paper, especially with sanding machines
- It quickly provides superior adhesion to various substrates, including galvanized steel, aluminum, steel and polyester
- It insures faster and easier sanding without pulling back the feather- edge and having to reapply filler
- Stain resistant
- Ideal for interior & exterior use
SPECIFICATIONS
| Approved substrates: | Steel, galvanized and other zinc coated steel, SMC, fiberglass and aluminum. For structural repairs prone to high degrees if stress and flexibility, use a fiber glass reinforced body filler.
|
| Tools required: | Mixing board, filler knife, plastic or rubber spatula
|
| Dry time: | Air Dry @ 25°C 15 -30 minutes depending on conditions
|
Viscosity:
| 7 -10cm
|
Impact Strength:
| ≥15kg/sq cm
|
Flexibility:
| ≤100mm
|
Roast test:
| @ 100 ± 6°C, after cured 2 hours 3 circles, no cracking, no bubbling
|
Adherence force, after cured 24 hours:
| ≥4 Mpa
|
Corrosion & water resistance:
| No blistering, wrinkling or softening after 24 hours immersed in water
|
Max recommended thickness (sanded):
| 8mm
|
Shelf Life:
| 24 months if stored in its original sealed containers at 20°C and a cool dry place. Never return mixed filler to can. Keep can closed and store in a cool dry place out of direct sunlight. |
| Downloads: | Technical Data Sheet Safety Data Sheet |
Please note that the best effort has been made to keep the stock levels accurate. If the stock level is quite low for this product, we recommend calling us on 1300 BC COAT (222 628) to confirm if this item is in stock before purchasing. Please note that if the item is on special or is a Mirka product, the stock levels are checked frequently.
Delivery to Sydney metro areas are very frequent and are usually delivered within 2 days. If you are located anywhere else in Australia, it may take between 2-8 days providing the item is in stock.
If 'Preorder' is showing, this means that this product is ordered in as your order is placed, or we have run out of stock and will order the product in for you. Call us on 1300 BC COAT (222 628) to check.
